Courses

2-HOUR ASBESTOS AWARENESS

This is a non-certified awareness class. This is not an asbestos remediation class. OSHA’s general industry regulation 29 CFR 1910.1001, Occupational Exposure to Asbestos, requires that all employees who could come into contact with materials that might contain...

read more

ACCIDENT INVESTIGATION

Accident Investigation shows participants steps that are taken in an accident investigation, and highlights how important it is for employees to fully cooperate with any inquiry. It also focuses on the root cause to develop policies and procedures to prevent future...

read more

AERIAL LIFT TRAINING

This course is required of all employees when they first get trained. It may be part of the initial training program or may be part of the mandatory skills evaluation required every three years. Classroom & Written Exam This is required as the first part of an...

read more

BLOODBORNE PATHOGENS

This course is designed to familiarize the participant with the hazards associated with bloodborne pathogens. Bloodborne pathogens are bacteria and viruses that live in blood and other bodily fluids. These bacteria and viruses include things like Hepatitis B,...

read more

CELL PHONE POLICY

This course helps to determining when it is acceptable for your employees to use their personal cell phones in the workplace, and when it is not. This should be part of new employee orientation. Who needs this course? Employers should take the time to communicate...

read more

CHEMICAL SAFETY

This course covers chemical hazards, labeling requirements, the parts of safety data sheets and employer as well as employee responsibilities. This class may be customized to meet the needs of a department or facility that deals specifically with one or a limited...

read more

COLD WEATHER CONDITIONS SAFETY

The Occupational Safety and Health Act (OSH Act) requires employers to comply with hazard-specific safety and health standards. In addition, pursuant to Section 5(a)(1) of the OSH Act, employers must provide their employees with a workplace free from recognized...

read more

COMPRESSED GASES

Hazards associated with compressed gases include oxygen displacement, fires, explosions, and toxic gas exposures, as well as the physical hazards associated with high pressure systems. Special storage, use, and handling precautions are necessary in order to control...

read more

DOT OUTREACH

This course will cover the general basics of the Federal Motor Carrier Safety Regulations (FMCSRs) as it applies to the trucking industry today. Through this course you will gain the understanding of what is required to be in compliance with the Federal Regulations...

read more

DUSK MASK TRAINING

This training will cover the different types of respiratory Personal Protection Equipment (PPE). Depending on the exposures you have in your workplace, different protection is required. Gases, vapors and airborne particulates all create exposures and require PPE Who...

read more

EMPLOYEE ACCESS TO MEDICAL RECORDS

This course is for employers that are unsure of significant employee rights under OSHA regulation 29 CFR 1910.1020. Employees have the right to access medical records relating to their employment. Failure to comply with this OSHA regulation may result in fines if an...

read more

FALL PROTECTION

Falls are among the most common causes of serious work related injuries and deaths. Employers must set up the work place to prevent employees from falling off of overhead platforms, elevated work stations or into holes in the floor and walls. OSHA requires that fall...

read more

FIRST AID CPR, AED CERTIFICATION (AMERICAN SAFETY & HEALTH INSTITUTE)

Minimum Number of Participants: 6 There is a $25 per student material fee for Employer Advantage clients. The National Safety Council First Aid, CPR and AED courses are designed to teach individuals how to provide first aid for illness and injuries or to provide basic...

read more

FORKLIFT TRAINING

This course covers operating, inspecting and safety requirements relating to the design, maintenance, and safe use of forklift trucks. It is designed to help students learn to evaluate the workplace and determine if loads can be safely moved. Who needs this course?...

read more

GENERAL ASBESTOS AWARENESS 1-HOUR

This is a non-certified awareness class. This is not an asbestos remediation class. OSHA’s general industry regulation 29 CFR 1910.1001, Occupational Exposure to Asbestos, requires that all employees who could come into contact with materials that might contain...

read more

HAZARD COMMUNICATIONS /GHS/SDS

Some type of hazardous chemicals is in just about every workplace. Everyday items like bleach, ammonia, solvents, gasoline and more create an exposure employers need to manage. Part of this management is to make employees aware of chemicals in the workplace. A program...

read more

HAZARDOUS / UNIVERSAL WASTE

The Department of Transportation requires five types of hazmat training. OSHA 29 CFR1910.120 covers employees involved in storage, disposal, medical surveillance and emergency actions in case of spills, while state and federal environmental agencies monitor complete...

read more

HOT WORK PROGRAMS

This course covers any work that involves working with or around open flames or sparks, or anything that could potentially start a fire. More specifically 29 CFR 1910.251 to 255 titled Welding, Cutting, and Brazing. This training course is designed to help guide you...

read more

LADDER SAFETY

Falls from portable ladders (step, straight, combination and extension) are one of the leading causes of occupational fatalities and injuries. In this course you will learn ladders are tools. Many of the same basic safety rules that apply to most tools also apply to...

read more

LOCKOUT/TAGOUT (LOTO)

This course teaches the proper use of energy-isolating devices in accordance with an established procedure to insure energy cannot be transferred to the target equipment causing unexpected start up and injuring employees. Failure to have or follow a LOTO program is a...

read more

MACHINE GUARDING

Employee exposure to unguarded or inadequately guarded machines is prevalent in many workplaces. Consequently, workers who operate and maintain machinery suffer approximately 18,000 amputations, lacerations, crushing injuries, abrasions, and over 800 deaths per year....

read more

OSHA 10 HOUR CONSTRUCTION

Minimum number of participants: 7 The 10-hour Construction Outreach Training Program is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a construction setting. Who is This Course For? Entry Level Construction...

read more

OSHA 10 HOUR GENERAL INDUSTRY

Minimum number of participants: 7 The 10-hour General Industry Outreach Training Program is intended to provide an entry level worker’s general awareness on recognizing and preventing hazards in a general industry setting. Who is This Course For? Entry Level General...

read more

OSHA CONSTRUCTION 30 HOUR

Class Topic: OSHA 30 Hour Construction Safety Course Description OSHA 30-hour training is a great method used to train workers and supervisors on hazard recognition and OSHA safety standards. Our training covers specific OSHA regulations and requirements as they apply...

read more

PEC BASIC ORIENTATION

(Basic Orientation Safety Awareness course that includes both Safegulf and SafelandUSA) Basic Orientation – The PEC Basic Orientation safety awareness course includes both SafeGulf and SafeLandUSA. PEC Basic was designed to take the place of multiple Operator...

read more

PEC CORE COMPLIANCE

Core Compliance, is a standardized program covering the health, safety, and environmental training most requested by oilfield operators and other host employers. Core Compliance is instructor-led training that, in addition to being SafeLandUSA and SafeGulf accredited,...

read more

PERSONAL PROTECTIVE EQUIPMENT

This course covers introduction in the selection and use of Personal Protective Equipment (PPE). OSHA requires PPE to be worn to reduce employee exposure to serious workplace injuries or illnesses resulting from contact with chemical, dust, vapors, fumes,...

read more

SCAFFOLDING

When OSHA revised its Scaffolds standard in 1996, the Bureau of Labor Statistics studies showed that 25 percent of workers injured in scaffold accidents had received no scaffold safety training, and 77 percent of scaffolds were not equipped with guardrails. OSHA...

read more

SCISSOR LIFT TRAINING

This course is required of all employees when they first get trained. It may part of the initial training program or may be part of the mandatory skills evaluation required every three years. This is required as the first part of an initial training program. This part...

read more

SKID STEER LIFT TRAINING

This course is required of all employees when they first get trained. It may part of the initial training program or may be part of the mandatory skills evaluation required every three years. This is required as the first part of an initial training program. This part...

read more